Tape compression fitting-outlet

Material/s: made of polypropylene.

Application: on 16-17 mm tape. And thicknesses between 0.1 and 0.9 mm.

Assembly: in PE pipes, drill the general pipe with the 7 mm perforator ref. 1171/1159 and insert the shot. The maximum admitted thickness of the general tube is 4.5 millimeters.

In tape insert the tape through the conical part of the piece up to the stop and turn the nut counterclockwise (outwards) until you press the tape. Take care that the tape does not deform.

    Request information

    13 + 3 =

    error: Contenido protegido