Simple water inlet clamp saddles
Material/s: Body manufactured in reinforced polypropylene, joints in nbr, screw fasteners in bichromated iron (4 screws from diameter 63 mm.)
- Threads manufactured in accordance with standards UNE19009, ISO R-7, DIN 2999 and UNI 338.
Assembly: In pe or PVC tubes provided that they conform to standards UNE 53428 (CPCB), UNE 53112 (PVC) o UNE 53131 (PE).
Accessories with standard thread sizes are used to screw the flanges to the outlets. The temperature performance of the clamp saddles is identical to that o pe tubes. It is recommended that the installation should be checked before being installed underground and that ptfe is used for the screw-fastened joints.
Use the flange as a template for drawing the hole.
Make the hole with a suitable tool.
Clean off any chips and locate the joint in its seat, centre the opening in the hole and screw in.